LR2 (LF) L6-3.2L (2008)
Wiper Pivot: Service and Repair
Rear Window Wiper Pivot Arm
Rear Window Wiper Pivot Arm
Special Service Tools
303-D121
Puller, General Purpose
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. CAUTION: Make sure that these components are installed to the noted removal position.
Release the cover.
Loosen, but do not remove the nut.
Using the special tool, release the rear window wiper pivot arm.
Special Service Tools: Puller, General Purpose
2. Remove the rear window wiper pivot arm nut.
Torque: 7 Nm
3. Remove the rear window wiper pivot arm.