LR3/Disco 3
Carefully lower jack until vehicle rests on axle stands.
Reverse procedure when removing vehicle from stands.
Raising the Rear of the Vehicle
Select 'P' - PARK on automatic transmission selector.
Position the lifting pad of the hydraulic jack under the centre of the rear cross member as shown.
CAUTION: Position suitable material between axle stands and longitudinal members to prevent damage
to the longitudinal members.
WARNING: Before commencing work on the underside of the vehicle, ensure that axle stands are
correctly positioned and vehicle is securely supported.
WARNING: Always chock the front wheels when jacking the rear of the vehicle.
CAUTION: Take care that the lifting pad of the jack is of a suitable size to avoid damaging the heat
shield. It is not advisable to use a spacer block between the lifting pad and the rear cross member as this may
result in some vehicle instability.
