LR3/Disco 3
9. Lift out the coin tray from the centre console
10. Remove the access panel from the centre console.
11. Locate the electric parking brake release cable, insert a suitable tool through the cable eye and pull the cable upwards
to release the parking brake.
On completion of 4 wheel towing
1. Apply the parking brake or if electrical power is not available, securely chock the wheels.
2. Detach towing equipment from towing/lashing eyes.
3. Fit the towing eye access panel and secure the toggle fasteners.
Transporting by trailer
Position the vehicle, apply the parking brake and select 'N' - Neutral on the manual or automatic gearbox selector lever
Left hand drive illustrated, right hand drive on opposite side of centre console.
CAUTION: The electric parking brake will not function until electrical power is restored it will, therefore,
be necessary to chock the wheels when vehicle is at a standstill.
WARNING: Do not release the parking brake until towing is about to commence. Whilst towing, do not
attempt to remove the ignition key and do not turn the key to any position other than 'II'. With the engine
switched off, the power assisted steering system and brake booster will be inoperative thereby resulting in an
increase in the effort required to turn the steering wheel and apply the brakes.
CAUTION: The vehicle tow connections should only be used in normal road conditions, 'snatch'
recovery must be avoided.
CAUTION: Use the towing/lashing eyes at the front and rear of the vehicle, DO NOT secure lashing
hooks or restraints to any other part of the vehicle.
CAUTION: If electrical power is not available and the parking brake is released, it will not be possible to
re-apply the parking brake. It will, therefore be necessary to select 1st gear - manual gearbox or 'P' Park -
automatic gearbox and ensure that the vehicle wheels are adequately chocked to prevent vehicle movement.