LR3/Disco 3
4. Check brake (stop) lamps for correct operation.
5. Check all exterior lamp lenses for clarity and condition; pay particular attention to headlamp and fog lamp lenses for
stone chips or damage.
6. Check horn for loud, clear sound.
7. Switch on headlamps and check that side/headlamp reminder warning sounds when door is opened.
8. Check operation of interior courtesy lamps.
9. Check operation of all instrument pack warning and indicator lamps.
Washers and Wipers
1. Check all wiper blades for condition and signs of splits or damage.
2. Check security of wiper arms.
3. Operate front and rear screen washers, check that jets are clear and correctly aimed.
4. Operate front and rear wipers at all speeds and check for smooth, smear free operation.
Check High/Low Gear Engagement
1. Select LOW range gear, drive vehicle forwards 3 to 4 vehicle lengths, stop vehicle and select HIGH range gear - gears
must engage smoothly.
Pollen Filter
1. Replace pollen filter. For additional information, refer to
Pollen Filter
(412-01 )
Corrosion/Cosmetic Inspection
1. Carry out the annual corrosion/cosmetic inspection using the Annual Corrosion Inspection Sheet.
Wheels and Tires
1. Check that tires comply with manufacturer's specification. For additional information, refer to
Wheels and Tires
(204 -
04 )
2. Check/adjust tire pressures including spare. For additional information, refer to
Wheels and Tires
(204-04 )
3. Vehicle fitted with Uni-directional tires: Mark the wheel to stud relationship of each road wheel and note location of
each road wheel to its respective hub.
