LR3/Disco 3
Brake fluid reservoir
1. Remove the auxiliary battery box cover.
2. Check the fluid level in the brake fluid reservoir, the level must be to the 'MAX' mark on the reservoir; top-up if
necessary.
3. Clean the area around the reservoir filler cap, remove cap.
4. If necessary, top-up using the recommended fluid to the 'MAX' mark on the reservoir. For additional information, refer
to
Specifications
(206-00 )
5. Install the reservoir filler cap.
6. Install the auxiliary battery box cover.
Power steering fluid reservoir
1. Check that the fluid level is to the mid-way mark between the 'MAX' and 'MIN' marks on the fluid reservoir, top -up if
necessary.
2. Clean the area around the reservoir filler cap, remove cap.
3. If necessary, top-up using the recommended fluid to the mid-way mark on the reservoir. . For additional information,
refer to
Specifications
(211-02 )
CAUTION: To prevent over filling, check/top-up the system with the engine switched off and the system
cold. Ensure that the steering wheel is in the straight ahead position, do not turn the steering wheel prior to
checking the fluid level.