LR3/Disco 3
NOTE:
The damper module comprises an air spring assembly, top mount and a damper assembly. The damper and air spring
are only serviceable as complete assemblies.
Damper
The damper assembly is a twin tube design with the conventional coil spring replaced by the air spring. The lower end of
the damper is fitted with a bush and is attached to the lower control arm with a bolt and nut.
The damper functions by restricting the flow of hydraulic fluid through internal galleries within the damper. The damper rod
moves axially within the damper, its movement limited by the flow of fluid through the galleries, providing damping of
undulations in the terrain. The damper rod is sealed at its exit point from the damper body to maintain the fluid within the
Item Part Number
Description
1
-
Rebound washer*
2
-
O-ring - damper rod (2 off)*
3
-
Self-locking nut*
4
-
Spacer - damper rod*
5
-
Bump washer
6
-
Spring aid*
7
-
O-ring - air spring sleeve support (2 off)*
8
-
Damper assembly*
9
-
Voss air fitting
10
-
Damper rod
11
-
Self-locking nut (3 off)
12
-
Top mount
13
-
Bush
14
-
Retaining pin - air spring assembly*
15
-
Air spring assembly*
* shows service items