LR3/Disco 3
2 .
Remove the front wheels and tires.
3 .
Remove the LH upper arm. For additional information, refer to
Upper Arm (60.35.01)
(Section 204-
01)
4 .
Release the heat shield for access to the upper arm bolts.
Remove the nut.
Remove the forward bolt and loosen the rearward bolt.
5 .
Loosen the upper arm bolts.
6 .
Disconnect the height sensor link arm.
7 .
CAUTION: Use a wrench on the hexagon provided to prevent the ball joint rotating.
Remove the stabilizer bar link nut.
Discard the nut.
8 .
CAUTION: To prevent the wheel knuckle falling outwards and disconnection of the halfshaft
inner joint, support the wheel knuckle.
Loosen the upper arm retaining nut.