LR3/Disco 3
Installation
1 .
Clean the components.
2 .
Install the wheel hub.
Using the special tools, install the halfshaft in the wheel hub.
Tighten the 4 bolts to 115 Nm (85 lb.ft).
3 .
Install a new halfshaft retaining nut and lightly tighten.
4 .
Install the brake disc. For additional information, refer to
Brake Disc (70.12.10)
(Section 206-03)
5 .
Tighten the new halfshaft retaining nut to 350 Nm (258 lb.ft).
Stake the nut to the halfshaft.
6 .
Install the wheel and tire.
Tighten the wheel nuts to 140 Nm (103 lb.ft).