LR3/Disco 3
Stabilizer Bar (64.35.08)
Removal
CAUTION: It is possible to install the stabilizer bar incorrectly. Note the position of the stabilizer bar
before removal.
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the rear bumper cover. For additional information, refer to
Rear Bumper Cover (76.22.74)
(Section 501 -19)
3 .
Remove the spare wheel and tire.
4 .
Raise the vehicle.
5 .
Remove the rear wheels and tires.
6 .
CAUTION: Use a wrench on the hexagon provided to prevent the ball joint rotating.
Release both stabilizer bar links.
Remove the 2 nuts.
7 .
Remove the body mount retaining bolts.
Remove the 8 bolts.
