LR3/Disco 3
Remover/installer rear suspension upper arm rear bushing
204-527/3
Removal
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the wheels and tires.
3 .
CAUTION: Always plug any open connections to prevent contamination.
Remove the brake tube.
Disconnect the 2 brake tube unions.
Remove the brake hose clips and release the hoses.
Release the brake tube from the clip.
4 .
Disconnect the height sensor link arm.
5 .
Release the wheel speed sensor lead.
6 .
Remove the LH upper arm.
Loosen the upper arm bolts.
Mark the position of the bolt in relation to the upper arm.
Disconnect the upper arm from the wheel knuckle.
Remove the upper arm bolts.