LR3/Disco 3
Rear wheel bearing remover/installer
205-802/5
Removal
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the wheel and tire.
3 .
Remove the wheel knuckle. For additional information, refer to
Wheel Knuckle (64.35.10)
(Section
204-02)
4 .
Remove the adjuster and return spring.
5 .
Remove the primary brake shoe.
Remove the hold-down spring and retaining pin.
Pivot the shoe to release it from the spreader plate and return spring.
6 .
