LR3/Disco 3
4 .
Install the brake disc dust shield.
Tighten the bolts to 9 Nm (7 lb.ft).
5 .
WARNING: Do not use compressed air to clean brake components. Dust from friction materials
can be harmful if inhaled.
Clean the backing plate and apply grease to the brake shoe contacts.
6 .
Clean the adjuster and set it to its minimum extension.
7 .
Install the secondary brake shoe.
Connect the parking brake cable retaining spring to the brake shoe lever, making sure the
spring is not twisted.
Install the hold -down spring and retaining pin.
8 .
Install the primary brake shoe.
Install the spreader plate and the spring.
Install the return spring.
Install the hold -down spring and retaining pin.
9 .
Install the return spring.
10 .
Install the brake shoe adjuster.
11 .
Using the special tools, install the drive flange.