LR3/Disco 3
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the wheel and tire.
3 .
Loosen the halfshaft retaining nut.
4 .
Remove the brake disc. For additional information, refer to
Brake Disc (70.12.33)
(Section 206-04)
5 .
Release the parking brake cable.
Disconnect the parking brake cable from the brake shoe lever.
Disconnect the parking brake cable from the backplate.
Release the cable from the lower arm.
6 .
Release the wheel speed sensor from the wheel knuckle.