LR3/Disco 3 Low Pressure Sensor - Wheels & Tires Maintenance Guide
Installation
1 .
CAUTION: Do not use compressed air to clean the sensor. Do not clean the sensor with
solvents or cleaning agents of any type, use a clean dry cloth.
Clean the component mating faces.
2 .
CAUTION: Do not apply any lubricant to the new valve.
NOTE:
If the sensor is replaced on a 'running' wheel, the new sensor identification will be learnt when the
vehicle is first driven. If a new sensor is fitted to the spare wheel the identification for that sensor
must be programmed into the Tire Pressure Monitoring System (TPMS) module using T4. The
identifcation code is provided on a label with the complete assembly and is also printed on the
casing of each sensor.
Install the tire low pressure sensor.
Install and hand tighten the nut whilst keeping the sensor in place.
Tighten the nut to 6.5 Nm (4.8 lb.ft).