LR3/Disco 3
The Terrain Response rotary control is located in the center console and allows the selection of five operating programs.
Each program is denoted by a symbol which represents the terrain encountered. The rotary control can be rotated to
select the required program. The control will only select the last program in its direction of rotation. Further rotation of the
control once the last program in either direction has been selected, will have no effect, e.g. once rock crawl has been
selected, further rotation in a clockwise direction will have no effect.
The Terrain Response control module is located below the rotary control. The module is connected via a harness
connector which also contains the wiring for the HDC switch, the transfer box high/low range switch, the air suspension
switch and the switch illumination circuits. The control module and switch uses four of these wires for a 12V battery supply
Item Part Number
Description
1
-
Terrain Response rotary control
2
-
Transfer box high/low range switch
3
-
Air suspension switch
4
-
Terrain Response control module
5
-
Special programs off
6
-
Grass/gravel/snow program
7
-
Mud/ruts program
8
-
Sand program
9
-
Rock/crawl program
10
-
HDC switch
