LR3/Disco 3
Differential Locking Module (51.30.01)
Removal
Installation
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the C-pillar lower trim panel. For additional information, refer to
C-Pillar Lower Trim Panel
(76.13.34)
(Section 501-05)
3 .
Release the parking aid module.
Remove the 2 nuts.
4 .
Remove the differential locking module.
Disconnect the 3 electrical connectors.
Remove the 3 bolts.
1 .
Install the differential locking module.
Install the bolts and tighten to 10 Nm (7 lb.ft).
Connect and secure the electrical connectors.
2 .
Install the parking aid module.
Tighten the nuts to 10 Nm (7 lb.ft).
3 .
Install the C -pillar lower trim panel. For additional information, refer to
C-Pillar Lower Trim Panel
(76.13.34)
(Section 501-05)