LR3/Disco 3
Installation
7 .
Remove the brake caliper upper bolt.
8 .
Remove the brake caliper housing.
1 .
WARNING: Do not use compressed air to clean brake components. Dust from friction materials
can be harmful if inhaled.
Clean the caliper housing and anchor plate using brake cleaning fluid.
2 .
Install the brake caliper.
3 .
Install the brake caliper upper bolt.
Tighten the bolt to 35 Nm (26 lb.ft).
4 .
Install the brake pads.
Install the two clips.
5 .
Rotate the brake caliper downwards.
Tighten the bolt to 35 Nm (26 lb.ft).
6 .
Connect the brake hose to the brake caliper.
Remove the blanking caps from the ports.
Install new sealing washers.
Tighten the brake hose union to 32 Nm (24 lb.ft).