LR3/Disco 3
Brake Disc (70.12.10)
Removal
Published: Jan 17, 2005
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the wheel and tire.
3 .
Release the brake hose bracket from the wheel knuckle.
Remove the bolt.
4 .
CAUTION: The brake pad wear indicator sensor is easily damaged. Do not use a lever to
remove the sensor. Use fingers only.
LH side only: Disconnect the brake pad wear indicator sensor.
5 .
Remove the brake caliper lower bolt.
6 .
Remove the brake pads.
Rotate the brake caliper upwards.
Remove the two clips.