LR3/Disco 3
4 .
Using a tie strap, tie back the speader plate spring.
5 .
WARNING: Make sure the return spring and the adjuster spring are correctly installed to the
primary shoe.
CAUTION: Make sure the brake shoe spring is not over stretched.
CAUTION: Make sure the closed end of the retaining clip is installed facing the brake shoe
adjuster. Failure to follow this instruction may result in damage to the vehicle.
CAUTION: Illustration 'A' is the LH side and 'B' is the RH side.
Install the primary brake shoe.
Install the spreader plate and the spring.
Install the return spring.
Install the hold -down spring and retaining pin.
