LR3/Disco 3
Installation
All vehicles
Vehicles with manual transmission
All vehicles
Vehicles with manual transmission
1 .
Clean the components.
2 .
Install the brake fluid reservoir.
Install new brake fluid reservoir seals.
1 .
Connect the clutch master cylinder supply line.
1 .
Connect the low brake fluid warning indicator switch electrical connector.
2 .
Bleed the brake system using T4. For additional information, refer to
Brake System Bleeding
(70.25.02)
(Section 206-00)
1 .
Bleed the clutch system. For additional information, refer to
Clutch System Bleeding
(Section 308-
00)
