LR3/Disco 3
Installation
6 .
Release the stoplamp wiring harness.
Release the 2 clips.
7 .
Remove the brake pedal assembly.
Remove the 6 nuts.
Position the brake booster forward to aid the removal of the brake pedal assembly.
1 .
Install the brake pedal assembly.
Position the brake booster to the brake pedal bracket.
Tighten the nuts to 25 Nm (18 lb.ft).
2 .
Secure the wiring harness.
Secure the clips.
3 .
Install the brake pedal clevis pin.