Land Rover Workshop Service and Repair Manuals

Installation  

6 . 

  Remove the brake pedal. 

Remove the nut and bolt.

7 .    

NOTE:

  Do not disassemble further if the component is removed for access only.

  Remove the brake pedal pad. 

1 . 

  Install the brake pedal pad. 

2 . 

  Install the brake pedal. 

Clean the component mating faces.

Tighten the nut and bolt to 45 Nm (33 lb.ft).

3 . 

  Install the brake pedal clevis pin. 

Install the clip.