LR3/Disco 3
Vehicles with manual transmission
4 .
Remove the brake booster push rod clevis pin.
Remove the retaining clip.
5 .
Remove the inner plenum base. For additional information, refer to
Auxiliary Battery Tray (76.10.31)
(Section 414-01)
6 .
CAUTION: Brake fluid will damage paint finished surfaces. If spilled, immediately remove the
fluid and clean the area with water.
Position an absorbent cloth to collect fluid spillage.
7 .
CAUTION: Before the disconnection or removal of any components, ensure the area around
joint faces and connections are clean. Plug any open connections to prevent contamination.
Disconnect 2 brake tubes from the ABS module.