LR3/Disco 3
3 .
Install the power steering fluid reservoir.
4 .
Position the front differential breather line.
5 .
Secure the power steering fluid cooler line.
Secure in the 3 clips.
6 .
Secure the coolant expansion tank.
Tighten the 2 bolts to 10 Nm (7 lb.ft).
7 .
Install the radiator upper deflector.
8 .
Install the radiator securing pegs.
9 .
Connect the A/C condenser refrigerant lines.
Clean the component mating faces.
Install new O-ring seals.
Tighten the bolts to 25 Nm (18 lb.ft).
10 .
Install the radiator grille. For additional information, refer to
Radiator Grille (76.55.03)
(Section 501-
08)
11 .
Install the cooling fan lower shroud. For additional information, refer to
Cooling Fan Shroud
(26.25.11)
(Section 303-03)
12 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
13 .
Fill and bleed the power steering system. For additional information, refer to
Power Steering
System Filling and Bleeding
(Section 211-00)