LR3/Disco 3
Power Steering Fluid Reservoir - 4.0L/4.4L (57.15.08)
Removal
Installation
Published : May 13, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Siphon the fluid from the power steering reservoir.
3 .
Release the power steering fluid reservoir from the retaining bracket.
4 .
CAUTION: Before disconnecting or removing the components, ensure the area around the joint
faces and connections are clean. Plug open connections to prevent contamination.
NOTE :
Some fluid spillage is inevitable during this operation.
Remove the power steering fluid reservoir.
Position an absorbent cloth to collect fluid spillage.
Release the hose clips and disconnect the hoses.
1 .
To install, reverse the removal procedure.
2 .
Fill and bleed the power steering system. For additional information, refer to
Power Steering System
Filling and Bleeding
(Section 211-00)