LR3/Disco 3
7 . Install the special tool to the high-pressure union.
8 . Refill the power steering reservoir.
9 . Connect the battery ground cable.
Specifications
10 . NOTE :
NOTE :
NOTE :
NOTE :
With the test valve open start the engine.
Install the O-ring seal.
Tie the pressure gauge aside under the hood.
Install the O-ring seals.
Connect the special tool line, to the special tool valve block assembly.
Remove the filler cap.
Ensure the steering components and test equipment are free from leaks.
Maintain the maximum fluid level during the test.
Make sure the steering is in the straight ahead position.
Under no circumstances must the low pressure spigot be removed from the steering pump.
Start the engine and turn steering fully lock to lock, stop the engine.