LR3/Disco 3
10 . Refill the power steering reservoir.
11 . Connect the battery ground cable.
Specifications
12 . NOTE :
NOTE :
NOTE :
NOTE :
With the test valve open start the engine.
13 . For correct power steering pressures, refer to the steering specification section.
Specifications
14 . With the engine at idle, slowly turn the steering wheel and hold on full lock.
Remove the filler cap.
Ensure the steering components and test equipment are free from leaks.
Maintain the maximum fluid level during the test.
Make sure the steering is in the straight ahead position.
Under no circumstances must the low pressure spigot be removed from the steering pump.
Start the engine and turn steering fully lock to lock, stop the engine.
Top-up the power steering fluid reservoir.
Install the reservoir filler cap.
Record the pressure reading.