LR3/Disco 3
Secure with the clip.
3 .
Connect the high pressure line to the steering pump.
Clean the component mating faces.
Install new seals.
Tighten the union to 25 Nm (18 lb.ft).
4 .
Install the accessory drive belt. For additional information, refer to
Accessory Drive Belt (86.10.03)
(Section 303-05)
5 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)
6 .
Fill and bleed the power steering system. For additional information, refer to
Power Steering System
Filling and Bleeding
(Section 211-00)
