LR3/Disco 3
Steering Column (57.40.06)
Removal
Published : Sep 13, 2004
WARNING: Take care if releasing the adjustment lever when the column has been removed from the
vehicle. The spring is under a high tension, and if released, could cause personal injury. Make sure fingers are
clear from any areas, likely to be trapped.
CAUTION: Air tools MUST NOT be used on steering column bolts.
1 .
Fully extend the steering column for access.
2 .
Remove the steering wheel. For additional information, refer to
Steering Wheel (57.61.01)
(Section
211-04)
3 .
Remove the driver side register trim panel. For additional information, refer to
Driver Side Register
Trim Panel (76.46.12)
(Section 412-01)
4 .
Remove the driver side closing trim panel.
Release the clip.
Remove the 2 screws.
Disconnect the electrical connector.
5 .
Remove the instrument panel access panel.
Release the 2 clips.