Land Rover Workshop Service and Repair Manuals

Ignition Switch (86.65.02)  

Removal  

Published : May 13, 2004

1 . 

  Fully extend the steering column for access.

2 . 

  Remove the steering column upper shroud.

Release the 4 clips. 

3 . 

  Remove the steering column lower shroud. 

Remove the 3 Torx screws. 

Release the steering column adjustment lever.

4 . 

   CAUTION: The ignition key must be removed prior to the removal of the ignition switch.

Remove the ignition switch. 

Disconnect the electrical connector. 

Depress the 2 clips.