LR3/Disco 3
7 . If the camshaft timing is found to be incorrect, proceed with the adjustment. Note both camshafts must be re-timed
with the camshaft roller followers removed.
8 . Remove the camshaft roller followers.
Camshaft Roller Follower (12.29.57)
9 . Position the generator aside for access.
10 . Remove the RH cylinder head harness carrier bolt.
11 .
NOTE :
Install the camshaft alignment special tool.
Remove the 3 bolts.
Position the harness carrier aside for access.
CAUTION: Damage to the camshaft will occur if the alignment tool is used to release the camshaft
sprocket bolt.
The camshaft timing slot is off center. Correctly timed the slot will be horizontal and below the center line.