LR3/Disco 3
24 .
Install the power steering pump.
Tighten the bolts to 25 Nm (18 lb.ft).
25 .
Install the differential extension.
Clean the component mating faces.
Install a new O-ring seal.
Tighten the bolts to 45 Nm (33 lb.ft).
26 .
Install the RH halfshaft. For additional information, refer to
Halfshaft RH (47.10.02)
(Section 205-
04)
27 .
Connect and secure the coolant hoses.
28 .
Install the radiator. For additional information, refer to
Radiator (26.40.01)
(Section 303-03)
29 .
Install the exhaust system. For additional information, refer to
Exhaust System (30.10.08)
(Section
309-00)
30 .
Install the fender splash shields. For additional information, refer to
Fender Splash Shield
(76.10.48)
(Section 501-02)
31 .
Install the accessory drive belt tensioner.
Tighten the bolt to 45 Nm (33 lb.ft).
32 .
Install the accessory drive belt. For additional information, refer to
Accessory Drive Belt (86.10.03)
(Section 303-05)
33 .
Install the air cleaner assembly. For additional information, refer to
Air Cleaner (19.10.01)
(Section
303-12)
34 .
Install the auxiliary battery tray. For additional information, refer to
Auxiliary Battery Tray (76.10.31)
(Section 414-01)
35 .
Install the battery tray. For additional information, refer to
Battery Tray (76.10.30)
(Section 414-01)
36 .
Align the engine oil cooler to the fitted position.
Tighten the Allen bolt to 60 Nm (44 lb.ft).
37 .
Fill the engine with oil. For additional information, refer to
Engine Oil Draining and Filling (12.60.05)
(Section 303-01)
38 .
With assistance install and align the hood.
Tighten the bolts to 25 Nm (18 lb.ft).
Secure the hood in the service position.
39 .
Connect the heated washer jet hose and wiring harness.
