LR3/Disco 3
36 .
Loosen the Allen bolt and rotate the engine oil cooler aside for access.
37 .
Disconnect the height sensor link arm.
38 .
CAUTION: Use a wrench on the hexagon provided to prevent the ball joint rotating.
Remove the stabilizer bar link nut.
39 .
CAUTION: To prevent the wheel knuckle falling outwards and disconnection of the halfshaft
inner joint, support the wheel knuckle.
Loosen the upper arm retaining nut.
40 .
Using the special tool, release the upper arm ball joint.
Remove and discard the retaining nut.