LR3/Disco 3
Crankshaft Front Seal (12.21.14)
Special Service Tools
Remover, crankshaft seal 303-D121
Installer, crankshaft seal
303-1100
Removal
Installation
Published : Jul 14, 2005
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the crankshaft pulley. For additional information, refer to
Crankshaft Pulley (12.21.01)
(Section 303-01)
3 .
CAUTION: Before the disconnection or removal of any components, ensure the area around
joint faces and connections are clean. Plug any open connections to prevent contamination.
Using the special tool, remove the crankshaft front seal.
1 .
