LR3/Disco 3
Installation
12 .
Tie the upper suspension arm aside for access.
13 .
Support the engine.
14 .
Raise the engine.
Remove the nut.
15 .
Remove the engine front mount.
Remove and discard the 2 bolts.
1 .
Clean the component mating faces.
2 .
Install the engine front mount.
Tighten the bolts to 45 Nm (33 lb.ft), then a further 60 degrees.
3 .
Lower the engine onto the mount.
Tighten the nut to 90 Nm (66 lb.ft).
4 .
Remove the engine support.
5 .
Secure the brake hose to the upper arm.
Tighten the bolt to 23 Nm (17 lb.ft).
6 .
Connect the upper arm and wheel knuckle.