LR3/Disco 3
Exhaust Manifold LH (30.15.10)
Removal
All vehicles
Left-hand drive vehicles
Published : May 10, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the exhaust system. For additional information, refer to
Exhaust System (30.10.08)
(Section
309-00)
3 .
Remove the fender splash shield. For additional information, refer to
Fender Splash Shield
(76.10.48)
(Section 501-02)
4 .
NOTE :
The heatshield consists of 3 parts.
Remove the upper suspension arm and brake line heat shields for access.
Remove the 3 nuts.
Remove the 3 bolts.
1 .
Check the road wheels are in the straight ahead position, then remove the steering column universal
joint upper clamp bolt.
Discard the retaining bolt.
2 .
Release the upper steering column shaft.
3 .
Remove the steering rack universal joint clamp bolt.
Discard the retaining bolt.
4 .
Release and remove the shaft and joint assembly.