LR3/Disco 3
Valve Cover LH (12.29.43)
Removal
Published : Apr 21, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the ignition coil-on-plug. For additional information, refer to
Ignition Coil-On-Plug (18.20.44)
(Section 303-07)
3 .
Remove the remaining ignition coil-on-plugs.
4 .
Remove the oil level indicator and tube.
Remove the dipstick.
Remove the nut.
Discard the O-ring seal.
5 .
Release the engine wiring harness from the retaining bracket.
6 .
Disconnect the variable camshaft timing ( VCT) oil solenoid electrical connector.
7 .
Disconnect the valve cover breather hose.
