LR3/Disco 3
Variable Camshaft Timing (VCT) Unit
Removal
NOTE :
Installation
Published : Mar 1, 2005
The removal and installation of the RH VCT unit is similar to the LH and is covered within the timing drive
component procedure.
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the timing drive components. For additional information, refer to
Timing Drive Components
(12.65.13)
(Section 303-01)
1 .
Install the timing drive components. For additional information, refer to
Timing Drive Components
(12.65.13)
(Section 303-01)
2 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)
