LR3/Disco 3
* Note: prior to checking the engine oil pressure, a road test of 6 miles (10 kilometres) must be carried out. Do not attempt
to attain engine normal operating temperature by allowing the engine to idle ** Note: that there are 50 different
thicknesses of graded tappet available ranging from 2.950 to 3.685 mm (0.116 to 0.145 in) rising in increments of 0.015
mm (0.0005 in) Torque Specifications
Maximum power:
UK/Europe and ROW - Not
NAS/Japan
220 kW (295 bhp) @ 5500 rev/min
NAS/Japan
300 bhp (224 kW) @ 5500 rev/min
Maximum torque:
UK/Europe and ROW - Not
NAS/Japan
425 Nm (313 lb-ft) @ 4000 rev/min
NAS/Japan
315 lb-ft (427 Nm) @ 4000 rev/min
Dimensions:
Length
720 mm (28.3 in)
Width
720 mm (28.3 in)
Height
785 mm (30.9 in)
* Engine oil pressure:
At idle
1.0 bars (100 kPa) (15.0 lb/in²)
At 3500 rev/min
3.0 bars (300 kPa) (44.0 lb/in²)
** Valve clearances:
Inlet
0.18 to 0.22 mm (0.007 to 0.008 in)
Exhaust
0.23 to 0.27 mm (0.009 to 0.010 in)
Description
Nm
lb-ft
Exhaust manifold heat shield bolt
25
18
* Exhaust manifold to cylinder head bolts
20
15
Battery clamp nut
10
7
* Cylinder head bolts:
Stage 1
20
15
Stage 2
35
26
Stage 3 - Tighten bolts 1 to 10
Further 90° Further 90°
Stage 4 - Tighten bolts 1 to 10
Further 90° Further 90°
Stage 5 - Tighten the M8 bolts 11 and 12
25
18
EGR pipe to exhaust manifold flange nuts
25
18
CMP sensor Torx screw
7
5
Oil filter adapter
60
44
++ Oil filter
18
13
Oil drain plug
25
18
Oil cooler bolts
10
7
Oil cooler Allen bolt
60
44
Primary timing chain tensioner guide bolts
12
9
Primary timing chain tensioner bolts
12
9
Secondary timing chain tensioner bolts
12
9
Primary timing chain tensioner guide stud
12
9
** VCT oil control unit bolts
22
16
LH VCT oil control unit nut
10
7
* Camshaft bearing cap bolts
10
7
