LR3/Disco 3
Cylinder Block
The cylinders and crankcase are contained in the cylinder block, which is of single cast CGI construction with a hollow
beam structure. With this type of construction less material is required than for a conventional cast iron block, therefore,
reducing engine weight and length.
Piston Cooling Jets
18
-
Oil level gauge
19
-
Bolt
20
-
Crankcase ventilation return hose
21
-
Cylinder head locating dowels
22
-
Core plug
23
-
Seal
24
-
Transmission locating dowel
25
-
Bolt, 2 of
26
-
Water inlet connector assembly
27
-
O ring
28
-
Bolt
29
-
Crankshaft position (CKP) sensor
30
-
Cylinder block aperture cover
31
-
Bolt
32
-
Blanking plug
33
-
O ring
34
-
Crankshaft timing plug
35
-
Bolt
36
-
Bolt, 3 of
37
-
Piston cooling jets
38
-
O ring
39
-
Water pump
40
-
Bolt, 3 of
41
-
Bolt, 3 of
42
-
Water pump pulley
43
-
Core plug
44
-
Stud bolts, 3 of
45
-
Coolant drain plug
46
-
Cylinder head locating dowels
47
-
Lower oil filter and cooler assembly
48
-
Seal
49
-
Upper oil filter and cooler assembly
50
-
Bolt, 8 of
51
-
Fuel cooler