LR3/Disco 3
The glow plugs are arranged centrally on the inlet side of the cylinder head, between the two inlet ports of each cylinder.
For additional information, refer to
Electronic Engine Controls
(303-14C Electronic Engine Controls - 2.7L Diesel)
The CMP sensor locates through a hole in a flange on the front LH side of the LH cylinder head. The exhaust camshaft
gear of the LH cylinder head incorporates a trigger wheel, which is used in conjunction with the sensor to measure engine
position. For additional information, refer to
Electronic Engine Controls
(303-14C Electronic Engine Controls - 2.7L
Diesel)
The engine lifting eyes are bolted to the cylinder head, one at the front and two at the rear, one per cylinder head.
Item Part Number
Description
1
-
Harness connector
2
-
Glow plugs
Item Part Number
Description
1
-
Camshaft Position (CMP) sensor