LR3/Disco 3
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the fuel injection pump belt. For additional information, refer to
Fuel Injection Pump Belt
(12.10.27)
(Section 303-05)
3 .
Install the special tool to the camshaft rear pulley.
Rotate the crankshaft to align the special tool to the engine lifting bracket.
Install the special tool retaining bolt.
4 .
Install the special tool to the camshaft rear pulley retaining bolt.
5 .
Using the special tools, remove and discard the camshaft rear pulley retaining bolt.
Rotate the crankshaft clockwise to retain the camshaft rear pulley.
6 .
Remove the special tools.
7 .
Remove the camshaft rear pulley.