LR3/Disco 3
Camshaft RH (12.13.03)
Removal
Published : Aug 5, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the camshaft front seal. For additional information, refer to
Camshaft Front Seal (12.13.44)
(Section 303-01)
3 .
Remove the brake vacuum pump. For additional information, refer to
Brake Vacuum Pump - 2.7L
Diesel (70.50.19)
(Section 206-07)
4 .
Remove the RH valve cover. For additional information, refer to
Valve Cover RH (12.29.44)
(Section
303-01)
5 .
Retain the secondary timing chain tensioner piston.
Reposition the secondary timing chain tensioner.
Install a 1.5 mm (0.060 in.) diameter pin into the secondary timing chain tensioner piston.
6 .
CAUTION: Evenly and progressively, release the camshaft bearing caps.
Remove the camshaft bearing caps.
Remove the 18 retaining bolts.
7 .
Remove the camshafts and secondary timing chain tensioner assembly.
Remove the two retaining bolts.