LR3/Disco 3
4 .
Remove the fuel injection pump belt. For additional information, refer to
Fuel Injection Pump Belt
(12.10.27)
(Section 303-05)
5 .
Install the special tool to the camshaft rear pulley.
Rotate the crankshaft to align the special tool to the engine lifting bracket.
Install the special tool retaining bolt.
6 .
Install the special tool to the camshaft rear pulley retaining bolt.
7 .
Using the special tools, remove and discard the camshaft rear pulley retaining bolt.
Rotate the crankshaft clockwise to retain the camshaft rear pulley.
8 .
Remove the special tools.
9 .
Remove the camshaft rear pulley.