LR3/Disco 3
16 .
CAUTION: Make sure the torque wrench setting procedure is followed correctly. Failure to
follow this instruction may result in damage to the vehicle.
Using the special tools, tighten the camshaft rear pulley bolt a further 75 Nm (56 lb.ft).
Rotate the crankshaft counter-clockwise to retain the camshaft rear pulley.
17 .
Remove the special tools.
18 .
Install the fuel injection pump belt. For additional information, refer to
Fuel Injection Pump Belt
(12.10.27)
(Section 303-05)
19 .
Install the LH valve cover. For additional information, refer to
Valve Cover LH (12.29.43)
(Section
303-01)
20 .
Install the camshaft front seal. For additional information, refer to
Camshaft Front Seal (12.13.44)
(Section 303-01)
21 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)