LR3/Disco 3
Vehicles with manual transmission
Vehicles with automatic transmission
All vehicles
CAUTION: Make sure the seal is installed correctly.
Remove the special tool.
Remove and discard the crankshaft pulley retaining bolt.
7 .
Install the crankshaft pulley.
Install a new crankshaft pulley retaining bolt.
Tighten the retaining bolt in two stages:
Stage one: Tighten to 100 Nm (74 lb.ft).
Stage two: Tighten a further 90 degrees.
8 .
Remove the special tool.
1 .
Install the special tool.
1 .
Install the special tool.
1 .
Install the new timing belt. For additional information, refer to
Timing Belt (12.65.18)
(Section 303-
01)
2 .