LR3/Disco 3
Vehicles with automatic transmission
Vehicles with manual transmission
Vehicles with automatic transmission
All vehicles
1 .
Using the special tool, lock the flexplate.
Install a starter motor bolt to retain the special tool.
2 .
Install the special tools to the exhaust camshaft pulleys.
If the special tool does not fit correctly, repeat the timing belt installation procedure.
Remove the special tools from the camshaft pulleys.
1 .
Remove the special tool from the flywheel.
Install the grommet.
1 .
Remove the special tool from the flexplate.
Install the grommet.
1 .
Install the starter motor. For additional information, refer to
Starter Motor (86.60.01)
(Section 303-06)
2 .
Install the timing belt cover. For additional information, refer to
Timing Belt Cover (12.65.03)
(Section
303-01)
3 .