LR3/Disco 3
9 .
Disconnect the valve cover breather hose.
10 .
Remove the fuel injector. For additional information, refer to
Fuel Injector (19.60.10)
(Section 303-
04)
11 .
Remove the 2 remaining fuel injectors.
12 .
Release the high-pressure fuel supply line.
Remove the retaining bolt.
13 .
CAUTION: Make sure that the high-pressure fuel supply line remains in contact with the fuel
injection supply manifold and the fuel injection diverter rail until both unions have been detached and
cleaned. Failure to follow this instruction may result in foreign matter ingress to the fuel injection
system.
Remove and discard the high-pressure fuel supply line.
Install blanking caps to the exposed ports.
14 .
Remove the fuel injection supply manifold.
Remove the two retaining bolts.
