LR3/Disco 3
7 .
Secure the high-pressure fuel supply line.
Tighten the retaining bolt to 10 Nm (7 lb.ft).
8 .
Install the fuel injector. For additional information, refer to
Fuel Injector (19.60.10)
(Section 303-04)
9 .
Install the 2 remaining fuel injectors.
10 .
Connect the valve cover breather hose.
11 .
Connect the EOP sensor electrical connector.
12 .
Connect the KS electrical connector.
13 .
Attach the glow plug harness and KS harness to the valve cover.
14 .
Install the accessory drive belt idler pulley.
Install the retaining bolt and tighten to 47 Nm (35 lb.ft).
15 .
Install the accessory drive belt. For additional information, refer to
Accessory Drive Belt (86.10.03)
(Section 303-05)
16 .
Install the intake air shutoff throttle. For additional information, refer to
Intake Air Shutoff Throttle
(19.70.32)
(Section 303-04)
17 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)