LR3/Disco 3
35 .
CAUTION: Make sure the timing blade on the high-pressure pipe union is correctly seated.
Connect the power steering high-pressure pipe union.
Remove the blanking caps from the ports.
Install new sealing washers.
Tighten the union to 25 Nm (18 lb.ft).
Remove the container.
36 .
Connect the engine earth strap.
Install the retaining bolt.
37 .
Install the generator. For additional information, refer to
Generator (86.10.02)
(Section 414-02)
38 .
Install the intake air shutoff throttle elbow support bracket.
Install the three retaining bolts and tighten to 10 Nm (7 lb.ft).
